TECHNO Solar Led Headlight Projector 1080 Lm with Panel, Twilight and Motion Sensor

Model ILS-LMSLF10

Solar beacon with built-in panel, supplied with twilight sensor, motion detector and lithium batteries. It can be easily installed on external walls or facades, without connection to the mains.

€95.16
€78.03 Discount 18%
Tax included
Estimated delivery from 07/03/2025 to 17/03/2025
Quantity

Tags :
Categories :
1.jpg
WINTER SALE25

Outdoor LED headlamp with solar energy IP65. Made of ABS, comes with twilight sensor, dual motion sensor, lithium battery. Maximum energy savings and ease of installation since it does not require connections to the mains , just fix the headlight to the wall, taking care to direct the panel towards sunlight and the headlight towards the area you want to illuminate.

Includes:

  • Integrated 6W solar panel, located on top;
  • Lithium battery 7200mAh - 3.7volt (charging time 8-9 hours; autonomy with full charge about 3 nights)
  • 60 Thed placed on the adjustable lower part, have a luminous flux of 1080 lm, light color 4000K (natural white light)
  • Double motion sensor, with a radius of about 5-8 meters
  • Twilight sensor (automatically turns on the headlight when the sun goes down)

Operation in 3 modes:

  • M1 : It turns on at 20% for 5 hours, then turns off.
  • M2: Lights up to 3% and then switches to 100% (1080 lm) when motion is detected, after 20 seconds of no movement the headlight returns to 3%.
  • M3: The lamp remains off and turns on at 100% (1080 lm) when motion is detected, and then turns off after 30 seconds.


Recommended installation height: 3-3,5 mt

Recommended installation distance: 6-7 mt
PROTECTION CLASS: IP65 (for outdoor).
DIMENSIONS: 300 x 215 x 32 mm, weight 1.5 kg

Operating temperature: -10° + 55°

Warranty 2 years

Manufacturer
System Elettronica Snc Viale A. Gramsci, 10 - 01032 Caprarola (VT) Italy - Tel. +39 0761646787 info@illuminasol.com
Type of Light Source
LED
Light Emission
DIRECT ORIENTABLE
Location
Garden

FAQs

  • Are the products ready to use?

    Yes, the products are ready to use, especially table and floor lamps (floor lamps). The assembly service is not included: we advise our customers to always read the manufacturer's instructions, as well as to contact a qualified electrical installer on site.

FAQs

  • Are the products ready to use?

    Yes, the products are ready to use, especially table and floor lamps (floor lamps). The assembly service is not included: we advise our customers to always read the manufacturer's instructions, as well as to contact a qualified electrical installer on site.

RELATED PRODUCTS